2006 Toyota Tundra Tire Pressure Sensor Reset

There are two ways to reset the indicator light - the first is to hold down the button hidden under the dashboard next to the steering column until the light goes out.

2006 toyota tundra tire pressure sensor reset. Also please check out the statistics and reliability analysis of Toyota Tundra based on all problems reported for the Tundra. Inflate all tires to 3 PSI over their. Apply the parking brake and turn the ignition to ON position with the engine OFF not the ACC position.

The 2006 Toyota Tundra uses a tire pressure warning system to warn a driver when tire pressure of any one of the tires is reduced. Perhaps a sensor is going bad. Use a tire pressure gauge to check the tire pressure.

I checked the pressure and have all the tires at 35 psi. If you have a tire page on your mfd see what all 4 corners are. I dont know how to turn that sensor off.

When the tire is filled or if the tires are changed or rotated the tire-pressure sensors must be reset to turn off the warning light and reinitialize the system. Ensure all tires are inflated to the pressure listed on the tire placard. Although i do have a 2006 tundra and if your spare tire is low that light will come on as well so you might want to check that out.

Hold down pressure warning reset switch located under the steering wheel or in glove box insert image of the reset switch until the TPMS telltale light blinks. If there is a problem it will flash the DTC number. Hold the TPMS reset button until the tire pressure light blinks three times then release it.

The TPMS reset button is usually located beneath the steering wheel. I recently got a used tundra and ever since I bought it my check tire pressure light has been on. Dont know what you have on the dash for tire pressure monitor on that yr.