2000 Toyota Tundra Rear Axle Removal

Next remove the 4 17mm nuts that hold the axle and bearing assembly to the axle tube.

2000 toyota tundra rear axle removal. Nitro Gear Axle take the steps necessary to. I went up there to check it out. On AmazonREAR WHEEL BEARING KIT.

First remove the 4 bolts from the driveshaft and lift it up and secure it with the bungee cord. I recomend draining and changing your rear differential fluid too because if the fluid by run out of axle housing. My problem was the axle seal kept failing and leaking oil which made the bearings fail because lack of lubrication.

They had rigged something to the hydraulic press and put some unbelievable. Last year I thought its was shoes and wheel cylinder replaced those but issues continued. Remove the 10mm bolt holding the parking brake cable to the rear of the hub assembly and pull the cable assembly out the back.

When a rear axle seal goes bad its typically noticeable by gear oil leaking all over a rear wheel and it may get into the brake drum and reduce rear brake feel. I got a 2000 Toyota Tundra 47 Auto. Httpsamznto2RK71GiOEM REAR AXLE SEAL.

Unfortunately for the truck I live in New England. 14mm wrench Second remove the 2 brake lines from the drums. Parts like Rear Axle Housing Differential are shipped directly from authorized Toyota dealers and backed by the manufacturers warranty.

They are located behind the rear brake drums. The lines are directly above the axle. I have been told that timkin bearings are not as good as they used to be years ago.