14 Toyota Tundra Oil Filter Location

Changing the filter element out is a two-step process first you have to drain the filter housing then you can remove the housing and replace the filter.

14 toyota tundra oil filter location. Toyota Tundra 2014 Extra Guard Engine Oil Filter. Remove filter cap with specific Toyota or Matco filter cap wrench remove filter element clean up residual oil and remove O rings from drain bolt and filter cap oil new ones and replace screw on filter cap and snap little metal tab into place reinstall drain bolt ensure oil is drained from pan and drain plug reinstalled fill with recommended oil. Ultra Synthetic is the best filter for consumers looking to get the most out of their investment in full synthetic oil Engineered for use with conventional or synthetic oil.

2012 Crewmax TRD 57 4x4 15 tint all around plus sunstrip. At the front end of the motor bottom left side drivers side. I have the 46L TRD Tundra and changing the oil is a task because you have to remove the skid plate.

Youll need a 12mm socket to take it off. Remove Oil Filter Housing Drain Cap. Changing the oil is a total pain in the butt.

Open the clear packet located in the oil filter box that contains both O-rings. Or the fuel filter is located under the rear of vechicle next to fuel tank. Genuine Toyota PTR03-34079 Intake Flow Accelerator.

52 l 549 US Quarts Filter. You also need the wrench to fit the filter cap. FRAM Extra Guard Engine Oil Filter.

Toyota oil filter kit. The oil filter is located in the front of the engine on the right side down at the bottom. Some after market filters have a screw in drain plug thats a little cleaner to use than Toyotas push in plug.