08 Toyota Tundra Headlight Adjustment

You want the low beam to be within two-inches of the mark which centers the high beam directly on the mark.

08 toyota tundra headlight adjustment. 13 Replace the caps on the top headlight adjustment screws and close the hood. Adjust the vertical headlight aim into the specified range by turning aiming screw A with a screwdriver. Not really on subject but I wonder what it would take to add auto adjust headlights to my 08 CM Limited.

A very small change at 5 feet results in a much larger difference at 25ft. Turn it counter-clockwise to make the light go up and clockwise to adjust down. Joined Jun 1 2012.

Underneath it is the adjustment bolt. Take a Phillips screwdriver and turn the black screw - it adjusts the light vertically. I found that trying to adjust them in the garage was near impossible because you are too close to the wall.

There is no horizontal adjustment. Theyre ANZO headlights more than likely or a clone. Insert a number 2 Phillips screwdriver into the hole in front of the mounting screw on the headlight assembly.

I used a small electric screwdriver to speed things up. 2 Oct 3 2015. Backing off to 20-25 feet made all the difference.

The one circled in red should be your up and down adjustment for the projector. I have owned a 2007 Tundra and a 2010 and have adjusted both. The adjusting screw on the side should be used in the same manner to move the bean left or right.