06 Toyota Tundra Trailer Brake Controller Plug Location

The controller has Black White Red and Blue wires.

06 toyota tundra trailer brake controller plug location. The system information and details are managed through the multi-information display or MID in the center of the instrument cluster with additional controls located in the dashboard to the lower right of the steering wheel. Discussion in 2nd Gen Tundras 2007-2013 started by Benstoy May 28 2019. The wire harness is suppose to make this all plug and play.

Installing a trailer brake controller in my 2020 Toyota Tacoma TRD Off Road Premium Tekonsha P3 httpsamznto3fYnTUeWiring Harness Tekonsha P3 httpsamz. The first step for our install is locating the factory wiring harness for the tow package. It may be taped to another wire and tucked up and out of the way.

The harness from Tekonsha is not long enough to go from the factory plug by the e-brake to the location I had to cut it in the middle and splice in some. Its usually taped up high in the main harness and has a cap on it which when removed will allow you to plug in your mating cable assembly. My owners manual says it should be behind the lower kick panel on the driver side.

Same as 2010 there is the plug and play connector for aftermarket controller. Ok so I just picked up a Prodigy P2 brake controller and the tundra wire harness. Electric Trailer Brake Controller - REESE Brand installation cheaper link.

These include the gain selection buttons and the manual trailer brake output slider. Toyota Brake Contoller Heres what I think Ive learned. Using a trim panel puller such as PTW80647 locate the notch in the panel and pry the panel out and away from the dash.

Should work on most Toyota trucks new and old. The connector should be located underneath the dash to the left of the steering column. The brake controller harness will plug into a factory port on the truck.