04 Toyota Tundra Headlight Adjustment

Turn the low beams on.

04 toyota tundra headlight adjustment. But roughly there are two screws one for the side-to-side adjustment and one for up-and-down adjustment. 04 XCab 4x4 TRDOR OME 25Tundra 17sFalken Wildpeak AT3W hitch w 7-pin ARE cap JVC HU wBT HIDLED lights its more of down and out or up and in than anything. You will only be able to adjust the vertical trajectory as there isnt a horizontal adjustment screw in the Toyota Tundra.

The attached document below may help in adjusting your lights. You adjust each headlight individually. Insert a number 2 Phillips screwdriver into the hole in front of the mounting screw on the headlight assembly.

Check for a screw behind the bulb. Determine if the headlights are aimed properly. You adjust each headlight individually.

- back the truck away from the wall to a distance of 3 meters 984 feet from the wall surface to the headlights - turn on low beams - the low beams should hit the wall 209 mm 0823 in _below_ the line headlamp height based on designed 4. 2010 Toyota Tundra TRD 57 4x4 CM. You need all your lights to be functional for safe driving to see the road and be seen by other drivers.

This installation article is a tutorial guide. Use the mark as a reference point for your headlights. I noticed your truck is 1st gen.

The lights should reflect 21 in 52 mm below headlight height B. Using a Phillips head screwdriver you can adjust its vertical aim. Jump to Latest Follow.